Muratec MFX-1500 manual Cleaning the FBS, If you have unsatisfactory printout quality

! CAUTION

Just in case . . .

5. Open the inner cover.

Important: You must hold the cover open. It won’t stay open by itself.

6. Use the cloth with the rollers cleaner to clean the face of the rollers. Rotate the rollers by hand to allow cleaning of the entire roller surface.

7. Use the cloth with isopropyl alcohol to clean the contact glass. Important: You must hold the

cover open. It won’t stay open by itself.

8. Gently close the scanner cover, making sure both sides are snapped down securely.

Cleaning the FBS

1. Open the book cover.

2. Get a soft, lint-free cloth and moisten it with isopropyl alcohol. Important: Make sure the cloth doesn’t have any rough areas.

Otherwise, it could scratch the glass surface of the FBS.

3. Using the cloth, gently clean the glass surface of the FBS and the white background area on the underside of the book cover.

If you have unsatisfactory printout quality

Your machine automatically cleans its charger and transport roller, two items which are very important to printout quality. So, if you notice poor printout quality (whether on received faxes or on copies), it may mean that your machine requires service. Review “Print quality problems” (pages 3.5–3.6), and see whether any of the proposed solutions helps your machine. If none do, please call your authorized Muratec dealer or call the Muratec Customer Support Center at (972) 364-3350.

Cleaning the LED print head

If you find your fax recipients complaining that the faxes you receive or copy image quality are streaked, the LED print head may be dirty.

1. Turn off your fax machine.

2. Get a soft, lint-free cloth and moisten it with isopropyl alcohol.

3. Open the top cover and then open the printer cover.

:

The fuser unit of orange color becomes very hot. Do not touch the fuser unit when you are cleaning the LED print head.

4. Using the cloth, gently clean the LED print head.

Note: Do not use abrasive materials on the LED print head.

Storing the toner and drum cartridge(s)

Follow these guidelines when you store the machine’s toner and drum cartridges.

∙Do not unpack a cartridge until you are ready to install it.

∙Store cartridges at a constant temperature within a range of 23º to 95ºF. (-5º to 35º C.), as well as a humidity range of 10% to 80%.

3.14