Beyond the basics
2.43

Dialing from the numeric keypad while using the PIN mask

Note: If the PIN mask feature is off, you dial normally.

If you’ve specified “Mode1” — use “star” power

1. Enter the phone number, then press the * (“star”) key and enter the PIN. The PIN
always goes last. For example, to dial 19725550911 with a PIN of “123456,” enter
19725550911*123456:
Press Start
19725550911*123456
2. Press START. The PIN disappears from the display, and your machine dials the
desired phone number.

If you’ve specified “Mode2” — the machine guides you

1. Enter the phone number as usual.
Press Start
19725550911_
2. Press START. The display now shows:
Enter PIN Number
_
3. Use the numeric keypad to enter the PIN.
Enter PIN Number
123456_
4. Press START. Your machine will dial the number.

Performing batch tra ns m is s ion while us ing the PIN mask

Note: The following instructions presume you are familiar with how to set and use both
your machine’s autodialer and its batch transmission feature. If you need to review,
see pages 2.8–2.16 for more on the autodialer and/or pages 2.24–2.27 for more on
batch transmission.
Note: If the PIN mask feature is off, you dial normally.

If you’ve specified “Mode1” or “Mode2”

Important: Any autodialer number you use with batch transmission must include the
PIN. (To review how to include this information in an autodialer number,
review the Mode 1 instructions under “Autodialing while using the PIN
mask,” page 2.42.)
Before sending a batch transmission to a desired n u mb e r the first time, you must store the
PIN within its batch box. Here’s how:
1. Perform the batch box setting until you’ve entered the batch box number.
The display now asks for the fax number (here, we’ve working with
batch box 1):
1:Fax Number
_
2. Enter an autodialer number, or use the numeric keypad to enter the fax number, to
which the batch transmission should go.
Important: If you’re using an autodialer number, it must contain the PIN, as
mentioned previously.
If you’re entering a number from the numeric keypad, enter the fax
number, followed by the * (“star”) key and then PIN.
3. Press ENTER to save the setting.
Note: If you press ENTER without entering the PIN, the fax machine beeps,
indicates “No PIN Number” on the display and then returns you to step 2.
Now, you can perform batch transmission to this box while the PIN mask
is activated.