Muratec MFX-1500 manual Clearing paper jams, If an original document jams

Just in case …

Clearing paper jams

We have designed your fax machine to work reliably for years. However, you may occasionally experience one type or another of paper jam. Here’s what to do.

If an original document jams

1. If an original document jams, the display will show:

Document Jam

ContStor Enter/Cancl

If you do wish to continue the operation, press ENTER and proceed to step 2.

To abort the operation, press CANCEL. This will delete from memory all pages stored during this operation, and the machine will return to standby mode.

Important: If you wait more than 60 seconds without pressing any key, the machine will delete from memory all pages stored during this operation and the machine will return to the standby mode.

Note: If this document is a non-sorting ADF job (either copying or faxing), the machine will abort the operation anyway; instead, you’ll have to perform the job again from scratch.

2. The display will show which page (i. e., which page number) is jammed. To continue scanning from the jammed page forward (keeping in mind the Note at the end of step 1, above), press START after clearing the jam.

P 2.Reset Document

Press Start

Note: If you wait more than 60 seconds without pressing any key, the machine will begin to send or copy the document(s) it has.

If you wish to cancel this operation, press STOP. The machine will delete all pages from memory and then return to its standby mode.

To remove the document:

1. Open the scanner cover by holding the scanner cover release. Important: Hold the cover open.

It won’t stay open by itself.

2. Lift the original document from the machine.

Note: If you cannot remove the original document, open the inner cover as shown at right, then remove the document.

3. Gently close the scanner cover, making sure both sides are snapped down securely.

Note: If the original document has become wrinkled or torn, do not re-send it.

3.2