Muratec MFX-1500 manual Erasing a programmable one-touch key

Beyond the bas cs

Erasing a programmable one-touch key

1.

2.

If the machine is in Fax mode, proceed to step 2.

If it is in Copy mode, press COPY/FAX to change to Fax mode.

Change to the Fax mode then press PROGRAM, C, 2, ENTER. The display shows something like:

Select Program No. 73:Delayed

If 73 is the key you want to erase, skip to step 3. (However, our examples from here will say “74” rather than “73.” )

3. Press the programmable one-touch key you want to erase. Here, we’ve selected 74:

Select Program No. 74:Polling

4.

5.

If you change your mind and wish to erase a different programmable one- touch key, just press that key before going on step 5.

Press ENTER. The display shows:

Erase P One-Touch

Check Program/Enter

Important: If you want to quit without erasing the programmable one- touch key you’ve selected, press PROGRAM. The fax will return to step 3.

6. Press ENTER to erase the number.

Erase P One-Touch ** Complete **

To erase another programmable one-touch key, repeat steps 3–5. Or press STOP to return to standby mode.

Printing a list of your programmable one-touch keys

Your fax machine can print a list of the commands you’ve stored in your programmable one-touch keys. The list includes each key’s one-touch letter, the telephone number, when the command should start, which command you’ve selected and — if applicable — the selected call group(s), SecureMail mailbox(es) or database file(s) you’ve stored in the key.

To print the list, change to the Fax mode then press PROGRAM, C, 3, ENTER.

2.70