Muratec MFX-1500 manual Attach the paper-handling parts, Attaching an optional handset

Getting started

Attach the paper-handling parts

1. Attach the document tray by inserting it into the appropriate holes, as shown.

2. Attach the Multipurpose tray by inserting its two pegs at a slightly upward angle into the appropriate holes, as shown.

3. Attach the paper tray by inserting its two pegs at a slightly upward angle into the appropriate holes, as shown.

Attaching an optional handset

You may purchase an optional handset for your fax machine. Here is how to attach the handset.

Important: Do not connect the handset directly to a telephone wall jack. Instead, connect it only to your fax, as these instructions describe.

1. Remove the two screw caps and screws.

2. Using a Phillips-head screwdriver, attach the handset cradle to the rear side of your machine, using the screws included with the cradle.

3. Plug one end of the handset cord (it’s curled) into the PHONE1 jack on the left of your machine.

4. Plug the other end of the handset cord into the jack on the handset. If connected to a phone line, your fax machine is now “off-hook.”

Note: The handset has a small “flash” button which you

can press while holding the handset, putting the

fax machine back “on-

hook” until you can hang up the handset properly in step 5.

5. Place the telephone handset onto the handset cradle. The cradle will press the handset’s “flash” button, hanging up the handset.

1.12