IMPORTANT SAFETY INSTRUCTIONS
Because automatic gate openers produce high levels of force, consumers need to know the potential hazards associated with improperly designed, installed, and maintained automated gate opener systems. Keep in mind that the gate opener is just one component of the total gate operating system. Each component must work in unison to provide the consumer with convenience, security, and safety.
This manual contains various safety precautions and warnings for the consumer. Because there are many possible applications of the gate opener, the safety precautions and warnings contained in this manual cannot be completely exhaustive in nature. They do, however, provide an overview of the safe design, installation, and use of this product. CAREFULLY
READ AND FOLLOW ALL SAFETY PRECAUTIONS, WARNINGS, AND INSTALLATION INSTRUCTIONS TO ENSURE THE SAFE SYSTEM DESIGN, INSTALLATION, AND USE OF THIS PRODUCT.
Precautions and warnings in this manual are identified with this warning symbol. The symbol identifies conditions that can result in damage to the opener or its components, serious injury, or death.
Because GTO automatic gate openers are only part of the total gate operating system, it is the responsibility of the consumer to ensure that the total system is safe for its intended use.
To Manually Open and Close the Gate, Follow the Procedure Below:
CAUTION: The gate will move freely and uncontrolled when the gate opener is removed from the gate. ONLY disconnect the opener when the opener power
switch is OFF and the gate is NOT moving.
Disconnecting the Opener
1.Turn opener power switch OFF.
2.Remove hairpin clip, clevis pin, and bushing from the front mounting point.
3.Remove the opener from the mount.
The gate can be opened and closed manually when the opener is disconnected.
Front Mount
Clevis Pin
Gate Bracket
IMPORTANT: NEVER allow opener arm to hang by the front mount - it will break from the arm weight.
CAUTION: Because the Mighty Mule gate opener is battery powered, disconnect the opener ONLY when the power switch on the opener is turned OFF. Unplugging the transformer does not turn power to the opener OFF.
Bushing
Hairpin Clip
NOTE: Substitute a Pin Lock (FM133) for the clevis pin on the front mount only of the gate opener to prevent unauthorized removal of the opener from the gate (see Accessory Catalog).
1