GTO Important Safety Instructions, Moving Gate, E-Z GATE OPENER UL325 SERIES, 12/31/04

IMPORTANT SAFETY INSTRUCTIONS

These warning labels should be found at the

!locations specified below. If any of them are missing, immediately contact GTO for replacements.

GTO DC SW350 Series Conforms to UL325 5th Edition Standards

12/31/04

Serial No. MM350-0000000GTO, Inc. - Tallahassee, Florida USAProduct identification label (1) installed under rear mount on arm.

Warning signs (2 enclosed) to be installed on each side of the gate (3–5 feet above the bottom of the gate)

® 350

E-Z GATE ®OPENER UL325 SERIES

1-800-543-GATE (4283) • www.mightymule.com

TO MANUALLY OPEN AND CLOSE THE GATE1.Turn opener power switch OFF.2.Disconnect front or rear mount from mounting bracket.3.Pull opener away from mounting bracket and move gate.

Disconnect opener ONLY when the power switch is OFF and the gate is not moving.

!

MOVING GATE!

!

Can Cause Injury or Death

1.KEEP CLEAR! Gate may move at any time.

2.Do not allow children to operate gate or play in gate area.

3.This gate is for vehicles only. Pedestrians must use separate entrance.

Maximum Gate: 550 lbs. (249.4 kg); 16 ft. (4.9 m) • Voltage: 12 Vdc; Frequency: 0Hz; Power: 25W • Class I, II, and III Vehicular Swing Gate Operator

Logo and warning labels (2) installed on each side of opener housing

7