Samsung MM-DJ8Q/XFO, MM-DJ8RH/ELS manual Repeat A↔ B Function, Press REP. A↔ B button

REPEAT A↔ B Function

Press REP. A↔ B button.

• Use this to listen to a specific section again during playback.

•Set the start and end points of the section you want to repeat 3 times.

• This is a useful when learning a foreign language.

•The TAPE REPEAT function can be used only on sections that are longer than 7 seconds.

Note	•	You cannot set the end point (B) within 7 seconds after
		setting the start point (A).

Selecting the Cassette Playback Mode

Your micro component system has three cassette playback modes which enable you to listen to both sides of a cassette automatically.

Press REV.MODE until the appropriate symbol is displayed.

• : One side of the selected cassette and then stops.

• : One side of the cassette.

The other side of the cassette and then stops.

• : Both sides of the cassette indefinitely until you press stop.

Tape Counter

When playing a cassette, a counter is displayed to enable you to take note of the counter value at the start of each track and thus start playback at the beginning of the track to which you wish to listen.

• The counter is only displayed when a cassette is being played.

Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing Counter Reset.

TAPE DECK

46