Connecting to External ComponentsConnecting to an External Analog Component

Example: Analog signal components such as a VCR, Camcorder, and TV.

Connecting the FM and AM(MW) Antennas

RADIO ANTENNA

R L

Audio Cable

If the external analog

component has only one Audio Out, connect either left or right.

1Connect Audio In on the DVD player to Audio Out on the external analog component.

• Be sure to match connector colors.

2Press AUX to select AUX.

• ‘AUX’ appears in the display.

AM Loop Antenna (supplied)

FM antenna connection

1.Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

•If reception is poor, connect an outdoor antenna. Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FM antenna.

If FM reception is poor, connect an outdoor FM antenna (not supplied).

RADIO ANTENNA

FM Antenna (supplied)

AM(MW) antenna connection

1.Connect the AM loop antenna supplied to the AM and terminals.

2.If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).

11

12