Programming the Order of CD Playback

Repeating One or All Tracks on the Compact Discs

A specific track on a compact disc.

All tracks on the compact disc selected.

1	Press REPEAT button.
	Each time you press the REPEAT button, the repeat mode will

change as follows:

MP3: RPT TRK ➝ RPT DIR ➝ RPT DISC ➝ SHUFFLE ➝ RPT OFF.

2 When you wish to stop the Repeat function, press REPEAT until RPT OFF is displayed.

◆RPT TRK: Repeatedly plays the selected track.

◆RPT DIR: Repeatedly plays all tracks in the selected folder.

◆RPT DISC: Repeatedly plays the entire disc.

◆SHUFFLE: Plays tracks in random order.(Each track can be played one time.)

◆RPT OFF: Cancels Repeat Playback.

1,2

You can repeatedly play back a designated section of a CD/MP3/WMA-CD.

1 Press the REPEAT A-Bbutton at the beginning of desired part. 'RPT A-' shows.

2 Press the REPEAT A-Bbutton at the ending of desired part. 'RPT A-B' shows.

3 To cancel REPEAT A-B function, press REPEAT A-Bbutton again.

Point B cannot be set until 5 seconds of playback has elapsed from point A.

ENG

The order of the track desired to listen The track not desired to listen

You can program up to 24 tracks.

You must stop the compact disc player before selecting the tracks.

1	If the CD function is selected, stop the player by pressing			.
1	If the CD function is selected, stop the player by pressing			.
2	Press PROGRAM/SET.
	Result: The following indications are displayed:
	(01 = Program no., -- -- = Track no. on the disc)
3	Select the required track by pressing the	or	button:


	Press the			button to move back through the tracks.

4	Press the			button to move forward through the tracks.

	Press PROGRAM/SET to confirm your selection.
	Result: The selection is stored and				is displayed.
5	To select other tracks, repeat steps 3 to 4.
6	Press PLAY (		) to listen to the track selection in the order
	programmed.
7	When press		button one time , compact disc player is stopped, and

	press	button again to cancel the selection.