Samsung MML2LH/ELS, MM-L2, MML2RH/ELS manual Setting the Clock, Listening to a Compact Disc

Setting the Clock

Your system is equipped with a clock which allows you to turn GB your system on and off automatically. You should set the clock:

When you purchase the Micro component system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1Switch the system on by pressing On/Standby.

2Press Timer/Clock twice.

Result: CLOCK is displayed.

3Press Program/Set.

Result: The hour flashes.

4To...Press...

Increase the hours

Decrease the hours

5When the correct hour is displayed, press Program/Set.

Result: The minutes flash.

6To...Press...

Increase the minutes

Decrease the minutes

7When the correct time is displayed, press Program/Set.

Result: The clock starts and is displayed, even when the system is in standby mode.

You can display the time, even when you are using another function, by pressing Clock once.

3Place your disc in the compartment, with the label on the disc facing upwards.

4Close the compartment by pushing down on the cover until it clicks into place.

Result: The display indicates the number of tracks on the disc.

5Press the PLAY/PAUSE ( ) button.

Result: The first track on the disc plays and the track number is displayed.

6To stop playback temporarily, press the PLAY/PAUSE ( ) button.

Press PLAY/PAUSE ( ) again to continue playing the disc.

7	To start playing	Press...
	at the beginning of...
	The next track	SKIP/SEARCH	once
	The current track	SKIP/SEARCH	once
	The previous track	SKIP/SEARCH	twice
	The track of your choice	SKIP/SEARCH	or
		the appropriate number of times
8	To search through	Press and hold down...
	the tracks...
	Forwards	SKIP/SEARCH	until you
		reach the required point
	Backwards	SKIP/SEARCH	until you
		reach the required point

You are advised to turn the volume down before using this function.

9Press the STOP ( ) button when you have finished.

Band
TUNER	CD	2 4
1 5	6

On/Standby	Timer	Timer
	on/off	Clock

12

EQ Preset	S.Bass	Mute	Function
Sleep	Program	Mono/ST	TUNER
	/Set
	3 5 7
			Band
Repeat	CD Repeat	Shuffle	+10

CD A B

VOLl.

Tuning

Mode

CDCD

4 6 VOL. 4 6

Timer	TAPE	AUX	EQ
Clock
Mute	Down	Up	S.Bass
	9 Tuning Mode
			On/Standby

CD

9 5 6

VOLl.

Listening to a Compact Disc

This unit has been designed to playback the CDs: Audio CD, CD Text, CD-R and CD-RW.

When you have loaded at least one compact disc into the

player, you can start listening to it.

Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit.

1Select the CD function by pressing CD on the front panel.

2Open the compact disc compartment by pressing down and releasing the cover.

7 8	Tuning	7 8
	Mode
	CD	CD

VOL.

When playing a CD-R or CD-RW

User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be played back only if they are already “finalized”.

You can play back your original CD-Rs or CD-RWs recorded in music CD format. (However, they may not be played back depending on their characteristics or recording conditions.)

Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

CD-RWs may require a longer readout time. (This is caused by the fact that the reflectance of CD-RWs is lower than for regular CDs.)

8