Pentax 17477, Optio E70, 17454, 17472 specifications Saving the Settings Memory, 103

Saving the Settings (Memory)

The Memory function is for saving the current camera settings when the camera is turned off.

For some camera settings, the Memory function is always set to O(On) (the settings are saved when the camera is turned off), while for others you can choose on or off (to choose whether the settings are saved or not when the camera is turned off). The items which can be set to O(On) or P (Off) in the Memory function are shown in the table below. (Items not listed here are always saved in the selected settings when the camera is turned off.)

If you select O(On), the settings will be saved in the status they were in immediately before the camera was turned off. If you select P (Off), the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is on or off.

Item	Description	Default	Page
		Setting
Face Priority	A Face Recognition mode set by using the I button.	P	p.65
Flash Mode	The flash mode set with the four-way controller (4)	O	p.89
Drive Mode	The drive mode set with the four-way controller (2)	P	p.83
			p.84
Focus Mode	The focus mode set with the four-way controller (5)	P	p.91
Zoom Position	The zoom position set with the Zoom/w/x button	P	p.71
Sensitivity	The [Sensitivity] setting on the [A Rec.Mode] menu	P	p.96
EV	The [EV Compensation] setting on the	P	p.95
Compensation	[A Rec.Mode] menu
Digital Zoom	The [Digital Zoom] setting on the [A Rec.Mode]	O	p.72
	menu
DISPLAY	The information display mode set with the	P	p.18
	4/W button
File No.	If a new SD Memory Card is inserted when On has	O	—
	been selected, file numbers are assigned sequentially.

3 TakingPictures

103