Pentax 17472, Optio E70, 17477, 17454 specifications Troubleshooting, 201

Troubleshooting

Problem	Cause	Remedy
	The batteries are not	Check if batteries are installed. If not,
	installed	install batteries.
		Check orientation of the battery. Reinsert
The camera will	The batteries are	the batteries according to the +-
not turn on	installed incorrectly	symbols in the battery compartment
		(p.27).
	The batteries are	Insert new batteries or use the AC
	exhausted	adapter.
	The camera is	The display is off when the camera is
	connected to a
No image appears		connected to a computer.
	computer
on the display
	The camera is	The display is off when the camera is
	connected to a TV	connected to a TV.
	The brightness level of	Adjust the brightness level in [Brightness
	the display is set too	Level] in the [W Setting] menu (p.167).
	dark
The display is		When the Power Saving function is on,
		the display automatically darkens after a
hard to see	Power Saving function	certain amount of time. Press a button to
		return to the normal brightness level.
	is on	Select [Off] in [Power Saving] in the
		[W Setting] menu to turn the Power
		Saving function off (p.168).
		Pictures cannot be taken while the flash
	The flash is charging	is charging. Wait until charging is
		finished.
The shutter will	There is no available	Insert an SD Memory Card with available
not release	space on the SD
		space or delete unwanted images (p.32,
	Memory Card or in the
	built-in memory	124).
	Recording	Wait until recording is finished.
The picture is dark	The subject is too far	The picture becomes dark if the subject is
when using the	away in a dark	too far away. Take pictures within the
	environment, such as
flash		specified flash range.
	a night scene

8 Appendix

201