Pentax 17477, Optio E70, 17454, 17472 Use the four-way controller 23 to change the month, Started

8 Use the four-way controller (23) to change the month.

Change the day and year in the same manner. Next, change the time.

If you selected [12h] in Step 4, the setting switches between am and pm corresponding to the time.

Date Adjust

Date Style	mm/dd/yy 24h
Date	01/01/2009
Time	0:00
MENU Cancel	OK OK

1 Getting

9 Press the 4 button.

The setting is saved and the camera returns to capture status.

[Language/], [Date], [Time], [Hometown], and [DST] can be changed. Refer to the pages below for instructions.

•To change the language, follow the steps in “Changing the Display Language” (1p.163).

•To change the date and time, follow the steps in “Changing the Date and Time” (1p.158).

•To change the city or turn DST on and off, follow the steps in “Setting the World Time” (1p.161).

When the [Initial Setting] or [Date Adjust] screen is displayed, you can cancel the setting operation and switch to the capture mode by pressing the 3 button. In this case, the [Initial Setting] screen will appear next time you turn the camera on.

If you press the 4 button in Step 9, the camera clock is reset to 00 seconds. To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 00 seconds.

The video output format (NTSC/PAL) is set to the format of the city selected in [Hometown] on the [Initial Setting] screen. Refer to “List of World Time Cities” (p.208) for the video output format of each city set as the initial setting, and “Changing the Video Output Format” (p.166) for changing the setting of the video output format.

Started

43