Pentax 17477, Optio E70, 17454, 17472 specifications 199, Memory Display

Message	Description
	This message appears when you try to switch to Q mode
Data being recorded	while an image is still being recorded, or when the protect
	setting or DPOF setting is being changed. It disappears
	after the image is recorded or the setting is changed.
	This message appears when the camera takes more than
Data being processed	five seconds to display an image due to image processing,
	or when the SD Memory Card or the built-in memory is
	being formatted.
Built-in memory full	Displayed if the built-in memory is full when saving a file.
No image to be	Displayed when there are no images.
processed
This image cannot be	Displayed for files that cannot be processed.
processed
No card in the camera	Displayed when no SD Memory Card is inserted.
The built-in memory is	Displayed when there is insufficient built-in memory to
not enough to copy
	perform copying.
images
Cannot process	Displayed when Red-eye Compensation processing fails.
correctly
Display image from built-	Displayed when the camera enters the built-in memory
in memory	display.
The camera will turn off	Displayed when the temperature within the camera is too
to prevent damage from	high and the camera turns off automatically. Wait for awhile
overheating	and then turn the camera on again after the temperature
	within the camera cools down.

Messages such as the following may appear on the display when using the PictBridge function.

Message	Description
Low paper level in the	The paper level of the printer is low.
printer
No paper in the printer	There is no paper in the printer.
Paper stuck in the printer	The paper is stuck in the printer.
Low ink level in the printer	The ink level of the printer is low.
No ink in the printer	There is no ink in the printer.
Printer error	An error message has been sent from the printer.
Data error	A data error message has been sent from the printer.
Connection error	Displayed when a PictBridge connection fails.
Check printer
Printing now	Displayed when printing is being executed.

8 Appendix

199