Pentax Optio E70, 17477, 17454, 17472 specifications 202

8 Appendix

Problem	Cause	Remedy
		The camera may have difficulty in
		focusing on such subjects as: low
	The subject is difficult	contrast subjects (a white wall, a blue
		sky, etc.), dark subjects, finely-patterned
	to focus on with	objects, rapidly-moving objects. It is also
	autofocus
		difficult to get proper focus when
The subject is not		shooting through a window or a net. Try
in focus		shooting using the focus lock (p.61).
		Locate the desired subject in the focus
	The subject is not in	frame (focusing area) in the center of the
		display. If it is difficult to do so, first lock
	the focusing area	the focus on the desired subject (focus
		lock), and then move the camera to
		recompose.
	The flash mode is set	Set to Auto or b (Flash On) (p.89).
	to a (flash off)
The flash does not	The drive mode is set
	to j
discharge	The focus mode is set	The flash does not discharge in these
	to s	modes.
	The shooting mode is
	set to C
The USB	The USB connection
connection with a		Set the USB connection setting to [PC]
personal computer	setting of the camera
		(p.165).
does not function	is set to [PictBridge]
properly
The USB	The USB connection
connection with a		Set the USB connection setting to
	setting of the camera
printer does not	is set to [PC]	[PictBridge] (p.165).
function properly

Very occasionally, static electricity may cause camera malfunction. In this case, remove the batteries and install them again. If the camera is then working properly, normal condition is restored and you can continue using the camera.

202