Adjusting Your Monitor

Menu Display Time

The menu will automatically turn off if no adjustments are made for a certain time period.

You can set the amount of time the menu will wait before it turns off.

1. Push the Menu ( ) button.

2. Push the - button or + button until the Menu Display Time screen is displayed.

3. Push the Menu ( ) button to open the Menu Display Time adjustment screen.

4. Use the - or + buttons to select 5, 10, 20, 50, 200 seconds. 20 seconds is the default value.

Display Mode (152T/172T)

You can see the frequency, the polarity of the operational signals and the resolution level.

Note

These screens do not allow any changes to the settings, they are for information only.

1. Push the Menu ( ) button.

2. Push the - button or + button until the Display Mode screen is displayed.

Source Select (192T)

You can see the frequency, the polarity of the operational signals and the resolution level.

Select Auto Source Select for the monitor to automatically select the signal sorce. Select Manual Source Select to manually select the signal source using the Source button. When push the 'Source' button, then Selects the Video signal while the OSD is off. (When the Source button is pressed to change the input mode, a message appears in the center of the screen displaying the current mode -- analog or digital input signal.)

Note

If you select the Digital mode, you must connect your monitor to the graphic card with a digital port using the DVI cable.

1. Push the Menu ( ) button.

2. Push the - button or + button until the Source Select screen is displayed.

15