Samsung MP-80S ,

◆

English - 8

Connect the USB cable between the USB(∏) jack

on the MP-80S and USB port of PC to copy the video

files from your PC.

☛MP-80S is compatible only with

Windows XP.

When you are done copying or deleting the video files, it is recommended to safely remove the unit's

HDD.

1Click the Safely Remove Hardwareicon in the notification area of the PC. When the Safely Remove

Hardwarewindow is displayed, select USB Mass Storage Device and click Stop.

2When the USB Mass Storage Device can be safely removed from the system message is

displayed, remove the USB cable.

3The unit turns off automatically when the cable is disconnected.

1When MP-80S is connected to the PC using USB cable, the unit automatically turns on and appears as an

external HDD to your PC.

2Once the USB connection is successfully established, the unit is recognized as a local disk (ex. E:, F:, G:).

You may identify the unit's HDD by its volume label "MP-80S".

3When the unit's HDD is identified on your PC, you may copy or delete the video files in the unit's HDD in the

same manner as you would operate on your PC.

◆

The drive letter of the local disk (e.g. E:, F:, G:, etc.) may differ depending on the computer

configuration.

Connecting MP-80S to PC using USB cable allows you to copy or delete the video file from the MP-80S.

☛The MP-80S only supports MPEG2 transport stream files distributed by Samsung

Electronics.

☛Warning:

DO NOT DELETE or MODIFYthe "System_Files" folder and its contents in the HDD.

If deleted or modified, the MP-80S may not operate correctly.

MD68-00290A-00Eng 6/28/05 6:37 PM Page 8