Samsung MXFS8000ZA Basic Functions, Selecting a Track, Repeat One or All Tracks on a CD, English

Basic Functions

Selecting a Track

You can select a desired track while the disc is being played.

To play the previous track

Press the [ button within 3 seconds after the current track has started playing.

Press the [ button twice at least 3 seconds after the current track has started playing.

To play the next track

Press the ] button.

To play the current track from the beginning

Press the [ button 3 seconds after the current track has started playing.

To play the track of your choice

Press the [ or ] button to move to a desired track.

•You can also use the number (0~9) buttons on the remote control to select a track.

Searching for a Specific Music Passage on a CD

When listening to a CD, you can quickly search for a specific music passage on a track.

Forward Search	)
Backward Search	(

You can also press and hold the [, ] buttons on the product to automatically scan for a track.

Repeat One or All Tracks on a CD

You can repeatedly play a track, a group of tracks, or an entire CD.

1.Press the REPEAT button on the remote control.

Each time you press the REPEAT button, the repeat mode will change as follows:

MP3: OFF ➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM

CD: OFF ➝ TRACK ➝ ALL➝ RANDOM

2.When you want to stop the repeat function, press the REPEAT button until "OFF" is displayed.

•OFF: Cancels repeat playback.

•TRACK: Repeatedly plays the selected track.

•DIR (DIRECTORY): Repeatedly plays all tracks in the selected folder.

•ALL: Repeatedly plays the entire disc.

•RANDOM: Plays tracks in random order.

A-B Repeat Playback

You can repeatedly play back a designated section of a CD.

1. Press the REPEAT A-B button at the beginning of the desired section.

• 'RPT A' will be displayed.

2. Press the REPEAT A-B button at the end of the desired section.

• 'RPT AB' will be displayed.

3. To cancel REPEAT A-B function, press the REPEAT A-B button again.

• 'OFF' will be displayed.

➣➣The REPEAT A-B function is available within a track.

CD Programming

This function is not available during playback of an MP3/WMA-CD.

•You can program the playback order of up to 24 tracks of your choice.

•However, you must stop playing the CD before selecting tracks.

1.While in CD playback mode, press the STOP (@) button to stop playing the CD.

2.Press the ENTER ( ) button to display the message below:

(01= program number, ---= track number)

English 9