Samsung MXHS9000 Searching for a Track Quickly, Using the Program Function, OFF Track ALL

Searching for a Track Quickly

You can select a track directly without the 1,

2button.

CDDA/MP3-CD/USB

1.Press the SEARCH button.

After pressing the SEARCH button, turn the VOLUME/SEARCH JOG control on the product to the left or right to select a desired track.

•You can move to the selected track directly.

2.When searching is done, the track will automatically start playing.

Using the Program Function

This function is not available during playback of an MP3-CD/USB.

•You can program the playback order of up to 99 tracks of your choice.

•However, you must stop playing the CD/USB before selecting tracks.

1.While in CD/USB playback mode, press the 5 button to stop playing the CD/USB.

2.Press the PROGRAM button to display the message below:

PROG 01 TRACK---

(01= program number, ---= track number)

3.Use the 1 or 2 button or the VOLUME/ SEARCH JOG to move to a desired track.

•Press 1 to move to the previous track.

•Press 2 to move to the next track.

4.Press the ¬ button to confirm your selection. The selection is stored and

is displayed.

5.To select another track, follow Steps 3 and 4 above.

6.Press the button to play the programmed tracks.

7.Press the 5 button to stop playing the programmed tracks, Press the 5 button again to cancel playing the programmed tracks.

•If you eject the disc, CD programming is cancelled.

If you turn off the product, CD/USB programming is cancelled.

NOTEs

✎✎CD/USB program play will continue if you try to switch to another mode.

✎✎USB REC, DELETE and TUNING/ALBUM buttons will not work in Program mode. If you press such buttons in Program mode, “PROGRAM PLAY” will be displayed instead.

✎✎If a file in the program to be played was not in a supported format, playback skips to the next file automatically.

Viewing or Editing Programmed Tracks

You can view and edit a list of programmed tracks.

1.If a programmed track is being played, press the 5 button once.

2.Press the PROGRAM button twice to display the message below:

SAVED 01 TRACK002

(01= program number, 002= track number)

3.Repeatedly press the ¬ button until the desired track is displayed.

4.Press the 1 or 2 button to select a different track.

5.Press the ¬ button to confirm your selection.

6.To play the programmed tracks, press the button.

To repeat

1.Press the REPEAT button.

Each time you press this button, the mode changes as follows:

OFF ; TRACK ; ALL

03 Functions

15 English