Samsung MXHS9000 Selecting a Stored Station, Timer Function, Setting the Clock, Setting the Timer

Functions

3.Find a station by:

•Pressing and holding the TUNING/ ALBUM , or . button on the remote control to automatically search for broadcasting stations.

4.Press the MO/ST button to switch between stereo and mono.

•In a poor reception area, select MONO for a clear, interference-free broadcast.

•This applies only when listening to an FM station.

5.If you do not want to store the radio station found, go back to Step 3 and search for another station.

Otherwise:

a.Press the ¬ button.

b.Or, press the TUNING/ALBUM button on the remote control to select a program number in the PRESET mode.

c.Press the ¬ button to save the preset.

6.To store other radio frequencies, repeat Steps 3 to 5.

NOTEs

✎✎In Tuner mode

-- In the Manual mode, you can use the 1 or 2 button or the DJ JOG control.

-- In the Preset mode, you can use the 1 or 2 button or the DJ JOG control on the product to search a stored radio station.

Selecting a Stored Station

To listen to a stored station, follow these steps:

1.Select FM by pressing the TUNER/AUX button on the product or remote control.

2.Press the TUNING MODE button on the remote control until “PRESET” is displayed.

3.Press the 1, 2 buttons on the main unit or the TUNING/ALBUM ,, . buttons on the remote control to select a preset number.

or

Turn the DJ JOG control left or right on the main unit to select the stored station.

Timer Function

Setting the Clock

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1.Press the TIMER SET button on the remote control twice. "CLOCK SET" is displayed.

2.Press the ¬ button on the remote control. The hour flashes.

•To increase the hours: TUNING/ALBUM ,

•To decrease the hours: TUNING/ALBUM .

3.When the correct hour is displayed, press

the ¬ button, and then the minutes flash.

•To increase the minutes: TUNING/

ALBUM ,

•To decrease the minutes: TUNING/

ALBUM .

4.When the correct minute is displayed,

press the ¬ button. "TIMER PLAY SET" appears in the display.

Setting the Timer

The timer enables you to set the product to switch on or off at specific times automatically.

•Before setting the timer, check that the current time is correct.

•For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

•If you no longer want the product to be switched on or off automatically, you must cancel the timer by pressing the TIMER ON/OFF button.

Example: You want to wake up to music every morning.

1.Press the TIMER SET button until TIMER PLAY SET is displayed.

20 English