Getting Started

Rear Panel

1
FM Antenna Terminals
1. Connect the FM antenna to the FM
antenna connector terminal.
2.
Slowly move the antenna wire until you
find a location where reception is good,
then fasten it to a wall or other rigid
surface.
3.
If reception is poor, you may need
to install an outdoor antenna. To do
so, connect an outdoor FM antenna
to the FM socket on the rear of the
system using a 75Ω coaxial cable (not
supplied).
2
ONLY FOR SERVICE
• This jack is for testing only. Please do
not use.
3
AUX IN 2 Terminals
1.
Use an Audio Cable (not supplied)
to connect AUX IN 2 on the product
to Audio Out on an external analog
output device.
• Be sure to match connector colors.
• If the external analog output device
has only one Audio Out jack, connect
either left or right.
• Press the TUNER/AUX button to
select AUX 2.
• If the product is in AUX mode for
more than eight hours and no
buttons on the front panel or remote
are pushed, the system will turn off.
4LED Terminals for Speaker Beat Waving.
5
2.2 CH Speaker Terminals
1. To achieve the correct sound quality,
when you connect the speakers,
match the color of the speaker plugs
to the color of the speaker jacks. See
below.
• LEFT channel (marked , White/
Purple).
• RIGHT channel (marked , Red/
Purple).
• Don't force the Purple SUBWOOFER
connector into the White or Red
speaker jack.
6
Cooling fan
• The fan operates while the unit is
powered on.
If you set the unit to the minimum
volume, the fan won't operate.
Secure a minimum 6 inches (15 cm)
of clear space on all sides of the fan
when installing the product.
7POWER
• Insert only the provided power cable.
8 English

23 4 5 6 7

1