Samsung SSD Magician DC
6
Features
This user guide describes the commands necessary to interact with Samsung SSD drives. The functionality includes:
Feature | Comments | |
|
| |
List | Detect list of attached Samsung SSD Drives in the system | |
|
| |
Firmware Update | Update the old firmware of the SSD to the new version | |
|
| |
Erase | Erase data on the SSD by issuing an ATA Format Unit command | |
|
| |
Overprovision | Resize the user capacity of the SSD | |
|
| |
TRIM | Issue trim command to the SSD | |
|
| |
S.M.A.R.T | Display smart information and log temperature of the connected | |
Samsung SSD drive, and estimate the lifetime of Samsung SSD | ||
| ||
|
| |
Set Max | Set the maximum address of the Samsung SSD to change its user capacity | |
|
| |
Set Feature | Change the certain device features of the Samsung SSD | |
|
| |
Disk Info | Display current overprovisioning value; max address value; state of write cache; WWN; phy speed; | |
| power mode of the Samsung SSD | |
|
| |
SCT | Execute some of SCT commands as specified in ATA specification including: SCT Write Same, | |
| SCT Feature Control and SCT Data Table (HDA Temperature History) | |
|
| |
Vendor Utility | Collect and display Failure Analysis log or Power Loss Protection log from the Samsung | |
SSD | ||
| ||
|
| |
Command History | Display history of the previously executed commands | |
|
| |
Help | Show detailed help | |
|
|
※In LSI RAID Configuration, some features may not be executed.
The details are described in “Supported Commands for LSI RAID” table.
