Samsung SSD Magician DC

8

The table below lists the limited support for the Intel C600 chipset families due to the well-known ISCI (Intel SAS Driver) driver issue on Linux platform. (https://github.com/Xilinx/linuxxlnx/commits/master/drivers/scsi/isci?page=1)

OS

Feature support

Comments

 

 

 

 

Limited support for some ATA

 

RHEL 5.7 and later

commands including Secure Erase, Set Max

 

 

Address, and FW Update

 

 

 

 

 

Limited support for some ATA commands

 

RHEL 6.1 and 6.2

including Secure Erase, Set Max Address, and

 

 

FW Update

 

 

 

 

 

Limited support for some ATA commands

http://sourceforge.net/

 

including Secure Erase, Set Max Address, and

 

projects/intel-sas/files/

RHEL 6.3

FW Update. But it can be fully supported when

RHEL6.3%20Driver%20

 

patched with ISCI 1.4 for RHEL 6.3 (refer to

 

Update%20v1.4.1/

 

comments on the right)

 

 

 

 

 

RHEL 6.4 and later

Full support

 

 

 

 

*Support for C600 chipsets has been determined by evaluations and tests in the major part, and the ISCI driver code analysis.

On Linux systems, the tool must run with root privileges. This can be done through either sudo or su commands.

Windows system requirements

The table below lists the limitation found due to default drivers’ behavior on handling SCSI and ATA pass through control code.

OS

Feature support

Comments

 

 

 

 

Limited support for some ATA commands

 

Windows Server 2008

including Secure Erase, Set Max Address, and

 

 

FW Update

 

 

 

 

 

Limited support for some ATA commands

 

Windows Server 2012

including Secure Erase, Set Max Address, and

 

 

FW Update

 

 

 

 

 

Limited support for some ATA commands

 

Windows Server 2012 R2

including Secure Erase, Set Max Address,

 

 

and FW Update

 

 

 

 

*Limitation of support for C600 chipsets has been determined by evaluations and tests.

In addition to the above limitations:

On Marvell controller, Magician feature may not work properly after hot plugging.

On Linux systems, the tool must run with root privilege. This can be done through either sudo or su commands.

Page 8
Image 8
Samsung MZ-7LM240E, MZ-7KM480Z, MZ-7KM240E manual Rhel 5.7 and later, Address, and FW Update, Rhel 6.1, Rhel 6.4 and later