Upgrading Memory

A memory is installed in the memory slot at the bottom of this computer. The procedures to replace the memory are described below.

Replace new memory only after shutting the computer down completely. Do not replace memory when the computer is in Sleep mode.

Disconnect main power plug and remove the battery before continuing.

Only use the same type of memory as specified in the Product Specification.

Replacing the Memory

1 Remove the screw on the memory compartment cover at the bottom of the computer using a screw driver.

2 Pull the memory module latches outward. The memory module will pop up.

Remove the memory module out at an angle of 30 degrees.

Fixing Screw

99