3 Enter a password, press <Enter>, reenter the password for confirmation, and press <Enter> again.
The password can be up to 8 alphanumeric characters. Special characters are not allowed.
4 When a message confirming the password configuration appears in the Setup Notice window, press <Enter>.
The supervisor password has been set.
The supervisor password is required to turn the computer on or to enter the BIOS Setup.
The User Password restricts access to the computer or for configuring the BIOS Setup, like a Supervisor Password. However, the Setup items that can
be configured with a User Password are restricted, unlike for a Supervisor Password.
Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password.
In the Set User Password item, press <Enter> and complete the procedures from Step 3 of Setting a Supervisor Password.
Setting Up a Boot PasswordTo setup a boot password, the administrator password (Set Supervisor Password) should be set in advance.
Set the Password on boot item to Enabled.Once a boot password is set, you have to enter the password to boot up the computer.
96