Samsung NP-N130 Setting a Boot Password, Enter, Setting a Supervisor Password, 2 In the Set Supervisor Password

Setting a Boot Password

When setting a password, you have to enter the password to use the computer or enter the BIOS Setup.

By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer.

Do not lose or forget your password.

If you have forgotten your password, contact a Samsung service center. In this case, a service fee will be charged.

Setting a Supervisor Password

A Supervisor Password is required to turn the computer on or to start the System Setup.

When setting a Supervisor Password, users other than supervisors cannot use the computer.

1 Setup.Select the Security menu in the BIOS

2 In the Set Supervisor Password

item, press <Enter>.

XXXXXXXX

95