5 Select Internet Protocol Version 4 (TCP/IPv4) from the Networking tab and click Properties.

6 Configure the IP settings.

When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually.

■ The LAN device driver may differ depending on

 

 

your LAN device model.

Note

■

To add a network component, click Install in the

 

screen shown in the figure above. You can add

 

 

 

 

clients, services, and protocols.

Note

When not using DHCP, ask your network administrator for the IP address.

7 When you have completed the settings, click the OK button.

The network settings have been completed.

93