Samsung NP-X22A002/SES FCC Part If fitted with a modem device, FCC Statement for Wireless LAN use

	Wireless devices are not user serviceable. Do not
	modify them in any way.
Caution	Modification to a wireless device will void the
	authorization to use it. Contact manufacturer for
	service.
	FCC Statement for Wireless LAN use:
	“While installing and operating this transmitter and
Caution	antenna combination the radio frequency exposure
	limit of 1mW/cm2 may be exceeded at distances
	close to the antenna installed. Therefore, the user
	must maintain a minimum distance of 20cm from
	the antenna at all times.
	This device can not be colocated with another
	transmitter and transmitting antenna.” (This
	Statement is not applicable to UMPC(Ultra Mobile
	PC) such as PDA, Portable PC.)

FCC Part 68

(If fitted with a modem device.)

This equipment compiles with part of the FCC rules. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company.

This equipment uses the following USOC jacks : RJ11C

An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or promises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instructions for details.

The REN is used to determine the quantity of devices which may be connected to telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by total RENs, contact the local telephone company to determine the maximum REN for the calling area.

If the terminal equipment causes harm to the telephone network, the Telephone Company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advanced notice in order for you to make necessary modifications to maintain uninterrupted service.

If trouble is experienced with this equipment (Modem) for repair or warranty information, please contact your local distributor. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

The user must use the accessories and cables supplied by the manufacturer to get optimum performance from the product.

No repairs may be done by the customer.

26