5 Select Internet Protocol Version 4 (TCP/IPv4) from the Networking tab and click Properties.
6 Configure the IP settings.
When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually.
| ■ | The LAN device driver may differ depending on |
Note |
| your LAN device model. |
■ | To add a network component, click Install in the | |
|
|
screen shown in the figure above. You can add clients, services, and protocols.
Note
When not using DHCP, ask your network administrator for the IP address.
7 When you have completed the settings, click the OK button.
The network settings have been completed.
90