Samsung NP530U3CA03US, NP535U3C Bottom right corner, Secure Drive PSD and enter the user password

Using the TPM Security Device (Optional)

Chapter 3. 74

Using the computer

When the virtual drive (PSD) does not appear When the virtual drive (PSD) is not loaded

You can only use the virtual drive (PSD) when you have selected the Personal Secure Drive (PSD) option during the program registration.

If you have not selected the option during the registration, complete the following steps.

1	From the Start Screen, right-click any area and select
	All apps	in the bottom right corner.

Then, click Infineon Security Platform Solution > Security Platform Management > User Settings tab > Configure Security Platform Features.

2	When the Initialization Wizard appears, select Personal
	Secure Drive (PSD) and enter the user password.

To use the virtual drive (PSD), the virtual drive (PSD) should be loaded first. If it is not loaded, you can load it according to the procedures below.

Right-click over the Security Platform		icon in the system
1 tray of the Taskbar and select Personal Secure Drive > Load
from the pop-up menu.
2 OKIn the.	load window, enter the basic user password and click

3 If you click Start > Computer, you will be able to confirm that the Personal Secure Drive is created.

3	Click Next several times according to the instructions of the	Note that when you have copied confidential data to the PSD,
		the original data files are not encrypted.
	Initialization Wizard to finish the wizard.