Samsung NP740U3EK02US When the virtual drive PSD is not loaded, From the pop-up menu, TPM chip

Using the TPM Security Device (Optional)

Chapter 3. 81

Using the computer

When the virtual drive (PSD) is not loaded

To use the virtual drive (PSD), the virtual drive (PSD) should be loaded first. If it is not loaded, you can load it according to the procedures below.

Right-click over the Security Platform		icon in the system
1 tray of the Taskbar and select Personal Secure Drive > Load
from the pop-up menu.
2 OKIn the.	load window, enter the basic user password and click

3 If you click Start > Computer, you will be able to confirm that the Personal Secure Drive is created.

Note that when you have copied confidential data to the PSD, the original data files are not encrypted.

When you have to register again (to erase the authentication information on the TPM chip)

To register a user again, you need to delete the existing authentication information saved on the TPM chip and then clear the TPM chip.

Register the user in the following order.

1	Delete the virtual drive.
2	Delete the existing authentication information saved on the
	TPM chip.