Samsung NZ63J9770EK/EE, NZ63J9770EK/EU manual Use

Hob use

Hob

To display the time remaining for any of the cooking zones, use the Timer control sensor.

The corresponding control indicator will begin to blink slowly.

The settings are reset using the Timer setting selectors ( or ). After the set period of time has elapsed, the cooking zone automatically switches itself off, an acoustic signal sounds as confirmation and the timer display indicates.

Count up timer

4.To cancel the timer settings, select the

target burner and hold down the Timer

controlsensor for 2 seconds. This will cancel the burner’s timer settings

with a beep. If holding down the Timer

controlsensor for 2 seconds without selecting a burner, this will cancel

the timer settings of the last changed burner.

NOTE

If you tap the Timer control sensor without selecting a cooking zone, the display turns on but no timer settings is applied.

NOTE

To change the settings quicker, touch and hold any of theorcontrol sensors until the desired value is reached.

use

For the count up timer to be used, the appliance must be switched on but all the cooking zones must be not use timer as a safety shutoff.

1. Touch the Timer controlsensor. will appear in the timer display.

2. The count up timer function becomes active and the display numbers increase over time. To cancel the timer settings, hold down the Timer controlsensor for 2 seconds.

3. To stop the timer, touch the Timer controlsensor.

34  English

NZ63J9770EK_EU_DG68-00634A-02_EN.indd 34

4/5/2017 5:04:18 PM