Power management
The cooking zones have a maximum power available to them.
If this power range is exceeded by switching on the Power Boost 
function, Power Management automatically reduced the heat setting of cooking zone.
•No.1 is only one cooking zone
•No.2 and No.3 is paired cooking zone
2The indicator for this cooking zone
alternates for some seconds between the set
1heat setting and the maximum possible heat setting. After then, the indicator changes
3from the set heat setting to maximum possible heat setting.
Pause
The Pause 
function simultaneously switches all cooking zones that are switched on to the low power setting and then back to the heat setting that was previously set. This function can be used to briefly interrupt and then continue the cooking process e.g. to take a telephone call.
When the Pause 
function is activated, all touch sensors except for the Pause 
, Lock 
and the On/Off control 
sensors are disabled. To resume cooking,
touch the Pause 
sensor again.
| Control Panel | Display |
|
|
|
To Switch On | Touch Pause |
|
|
|
|
To Switch Off | Touch Pause | Return to previous power level |
|
|
|
Sound on/off
1.Touch the On/Off control 
sensor for
approximately 1~2 seconds.
2.Touch the Pause 
sensor for
3 seconds within 10 seconds after Power On.
3.Sound will OFF and 
will show in the
display.
4.To change Sound setting, repeat No1
and No2 procedure.
Sound will ON and 
will show in the display.
NOTE
Turn on the Power, It is not possible to operate sound on/off control after 10 seconds.
English 21
Hob use
3/2/2016 1:56:58 PM
