Virtual flame technology
Virtual flame technology creates the appearance of flames when you turn on an induction element.
•Virtual flame technology is available only on the right burner.
•As you set the heat setting sensor to adjust the power level, the brightness of
the flames change.
• The virtual flame may look different depending on the appearance, size, or position of the cookware. (For the best results, use cookware that, matches the element size. Cookware that is too large can cover the virtual flame. Cookware that is too small can cause the virtual flame to be
•Impurities on the cookware bottom or the cooktop surface can cause the virtual flame to be
NOTE
If you want to turn off Virtual Flame technology, you must touch keep warm 
sensor during 3 seconds as soon as you turn on the hob.
This function is available only immediately after turn on the hob. After another action can not be set to function.
NOTE
Use a suitable cookware when using Virtual flame burner.
Size | |
|
|
Cookware surface | Horizontal hairline |
|
|
Material | STSS (Stainless steel) |
|
|
When conditions are satisfied upper table, Virtual Flame shape can be formed appropriately.
Residual heat indicator
When an individual cooking zone or the hob is turned off, the presence of residual heat is shown with an 
, 
(for “hot”) in the digital display of the appropriate cooking zones. Even after the cooking zone has been switched off, the residual heat indicator goes out only after the cooking zone has cooled.
You can use the residual heat for thawing or keeping food warm.
WARNING
As long as the residual heat indicator is illuminated, there is a risk of burns.
WARNING
If the power supply is interrupted, the 
, 
symbol will go out and information about residual heat will no longer be available.
However, it may still be possible to burn yourself. This can be avoided by always taking care when near the hob.
Temperature detection
If for any reason the temperatures on any of the cooking zones were to exceed the safety levels, should this happen then the cooking zone will automatically reduce to a lower power level.
When you have finished using the hob, the cooling fan will continue to run until the hob’s electronics has cooled down. And the cooling fan switched itself off depending upon the temperature of the electronics.
English 15
Parts and features
2/18/2016 12:43:58 PM
