Hob use
Hob use
Power management
The cooking zones have a maximum power available to them.
If this power range is exceeded by switching on the Power Boost 
function, Power Management automatically reduced the heat setting of cooking zone.
•Left side : No.1 and No.2 is paired
|
| cooking zone |
1 | • | No.3 is only one cooking zone |
| The indicator for this cooking zone | |
3alternates for some seconds between the set heat setting and the maximum possible heat
2 | setting. After then, the indicator changes |
| |
| from the set heat setting to maximum |
| possible heat setting. |
Pause
The Pause 
function simultaneously switches all cooking zones that are switched on to the low power setting and then back to the heat setting that was previously set. This function can be used to briefly interrupt and then continue the cooking process e.g. to take a telephone call.
When the Pause 
function is activated, all touch sensors except for the Pause 
, Lock 
and the On/Off control 
sensors are disabled. To resume cooking,
touch the Pause 
sensor again.
| Control Panel | Display |
|
|
|
To Switch On | Touch Pause |
|
|
|
|
To Switch Off | Touch Pause | Return to previous power level |
|
|
|
22 English
Flex control
The Flex function can operate complete left side cooking zone for using large size cookware. (example : oval cookware, fish kettle)
1.Touch the Flex zone Plus 
sensor.
2.For setting and adjusting the power
level, touch the Heat setting sensor.
NOTE
•If you touch the Flex zone plus sensor during operating, Flex zone plus function will be off.
•If you touch Flex zone Plus sensor while each burner operation different level, burner set at a high level.
•Touching the Flex zone Plus sensor while the Flex zone is operating turns off the Flex zone.
•When moving or adding cookware to a new Flex zone Plus, cancel the current operation, and then press the corresponding sensor to activate the cooking zone.
2/18/2016 12:44:02 PM
