Samsung NZ63K7777BK/ET manual Timer count down

Hob use

Hob use

Timer (count down)

Using the timer as a safety shutoff:

If a specific time is set for a cooking zone, the cooking zone will shut itself off once this period of time has elapsed. This function can be used for multiple cooking zones simultaneously.

Setting the safety shutoff

The cooking zone(s) for which you want to apply the safety shutoff must be switched on.

1.After switched on, press the

corresponding cooking zone to activate the flash signal for the corresponding cooking zone display.

2. Press Timer control sensor. The number 10 will be displayed above the timer display.

NOTE

The default setting of the timer is 10.

3. Use the Timer setting sensor ( or

) to set the desired amount of time, for example, 15 minutes, after which the cooking zone will automatically switch itself off. The safety shutoff is now activated.

NOTE

The timer can be set from 1 to 99.

20  English

4.To cancel the timer settings, select the

target burner and hold down the Timer controlsensor for 2 seconds. This will cancel the burner’s timer settings with a beep. If holding down the Timer controlsensor for 2 seconds without selecting a burner, this will cancel

the timer settings of the last changed burner.

To display the time remaining for any of the cooking zones, use the Timer control sensor after select burner.

The corresponding control indicator will begin to blink slowly.

The settings are reset using the Timer setting sensor ( or ). After the set period of time has elapsed, the cooking zone automatically switches itself off, an acoustic signal sounds as confirmation and the timer display indicates.

NOTE

To change the settings quicker, touch and hold any of theorcontrol sensors until the desired value is reached.

NZ63K7777BK_ET_DG68-00803A-00_EN.indd 20

3/30/2016 4:45:47 PM