Adjusting the PDP Display

Energy Saving

MENU → → ENTER → [Setup] → → ENTER → [Energy Saving] → , → ENTER

This feature adjusts the power consumption of the unit in order to save energy.

1.Off

2.On

Note

If you want to reduce the standby power consumption, set Energy Saving to On. However, when Energy Saving is On, you cannot use the remote Power On function of the MDC and the WOL (Wake On LAN) function of MagicInfo.

HDMI Black Level

MENU → → ENTER → [Setup] → → ENTER → [HDMI Black Level ] → , → ENTER

When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. In this case, adjust the screen quality of your TV by configuring the HDMI black level.

1.Normal2.Low

Video Wall

A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen.

When the Video Wall is on, you can adjust the Video Wall screen setting.

MENU → → ENTER → [Setup] → → ENTER → [Video Wall ]

55