Adjusting the PDP Display

MagicInfo

Available Modes

PC / DVI

AV

HDMI

MagicInfo

TV

Note

The TV menu is available when a TV tuner box is installed.

The MagicInfo menu is available when a network box is installed in the HN or H model.

Note

The operating system for this set only supports English so the other languages might be corrupted on the screen.

For MagicInfo, a remote control is available for MagicInfo. However, it is recommended using a separate USB keyboard.

For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up external devices only if the PDP Display turns on.

Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the program (MagicInfo) may stop. If you do unplug the cable, restart the system.

Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program (MagicInfo) may stop.

To access other sources, press the SOURCE button in MagicInfo.

The preset password for the PDP Display is "000000".

The server program's Power-On option works only if the PDP Display's power is completely shut off.

Please make sure not to use the Power-On option when the PDP Display is in the process of shutting down since this may cause system errors on the PDP Display.

In the OSD image of MagicInfo, Network mode is the same as Device.

When using MagicInfo with the MagicInfo Pro Server Program: perform Network mode.

When using MagicInfo with the device directly connected to PDP Display : execute Device mode.

Press ALT + F12 to directly go to the MagicInfo Window screen.

To setup MagicInfo on a Windows screen, a keyboard and mouse are required.

To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help.

65