Adjusting the PDP Display
1.Off
2.Cool2
3.Cool1
4.Normal
5.Warm1
6.Warm2
Note
If you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp function is disabled.
Color Temp. 
MENU → 
→ ENTER → [Picture] → 
→
→
→ ENTER → [Color Temp.] → 
, 
→ ENTER
Color temp is a measure of the 'warmth' of the image colors.
Note
This function is only enabled if the Color Tone is set to Off.
Size 
MENU → 
→ ENTER → [Picture] → 
→ 
→ 
→
→ ENTER → [Size] → 
, 
→ ENTER
The Size can be switched.
1.16:9 - Sets the picture to 16:9 wide mode.
2.Zoom 1 - Magnifies the size of the picture on the screen.
3.Zoom 2 - Magnifies the size of the picture more than “Zoom 1”.
4.4:3 - Sets the picture to 4:3 normal mode.
5.Just Scan - Displays the input scenes as they are without any cutoff when HDMI 720p, 1080i, 1080p signals are input.
Note
Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Just Scan feature.
