English - 8
Press the POWER button on the remote control.
You can also use the POWER button on the TV.

➢

It may take a while before you see a full picture.
Turning the TV On and OffViewing the Menus
1
With the power on, press the MENU button.
The main menu appears on the screen. Its left side
has five icons:
Picture, Sound, Channel, Setup, Input.
2
 
Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s
sub-menu.
3
Press the EXIT button to exit.
➢
It takes about one minute until the on-screen
menu disappears.
Your TV can memorize and store all of the available channels
for both “off-air” (air) and cable channels. After the available
channels are memorized, use the CH
W.LINK
or CH
W.LINK
button
to scan through the channels. This eliminates the need to
change channels by entering the channel digits. There are
three steps for memorizing channels: selecting a broadcast
source, memorizing the channels (automatic) and adding and
deleting channels (Channel Lists).
Memorizing the Channels

Selecting the Video Signal-source

2
Press the ENTER button to select Antenna.
Press the ▲ or ▼ button to select Air or Cable,
then press the ENTER button.
Press the EXIT button to exit.
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
ChannelT V
Enter
Move
Air
Cable
Return

Storing Channels in Memory

(Automatic Method)

1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
2
Press the ▲ or ▼ button to select Auto Program,
then press the ENTER button.
3
Press the ▲ or ▼ button to select the antenna
connection, then press the ENTER button.
➢ Air : Air antenna signal.
Cable : Cable antenna signal.
Auto : Air and Cable antenna signals.
Antenna : Air
►
Auto Program
►
Clear Scrambled Channel
►
Channel List
►
Name
►
Fine Tune
►
Signal Strength
►
ChannelT V
Enter
Move Return
Auto ProgramT V
Select the antenna to execute the Auto
Program function.
Air
Cable
Auto
Start
Start
Enter
Move Return
Start
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
Antenna : Air
►
Auto Program
►
Clear Scrambled Channel
►
Channel List
►
Name
►
Fine Tune
►
Signal Strength
►
ChannelT V
Enter
Move Return
Mode : Standard
►
Cell Light 7
Contrast 80
Brightness 45
Sharpness 50
Color 50
Tint G 50 R 50
▼
More
PictureT V
Enter
Move Exit
BN68-01662A-00Eng_0404.indd 8 2008-05-19 오후 6:05:48