Connecting your TV
Connecting a computer
To connect a PC to the RGB/PC terminal on the TV:
An analogue RGB (15 pin) computer cable can be connected.
TV back view | TV back view |
Mini
Computer
RGB PC cable
Conversion adapter (if necessary)
Audio cable for
Connect a PC cable from the computer to the o RGB/PC terminal on the back of the TV.
The following signals can be displayed:
•Acceptable PC signal format: VGA: VESA 640 5 480 @ 60 Hz
However, these signal formats are converted to match the number of pixels of the LCD panel. Therefore, the TV may not display small text properly.
If you connect this unit to your PC, the compressed image is displayed in
Notes:
•Some PC models cannot be connected to this TV.
•If connecting a certain PC model that signal is particular, the PC signal may not be detected correctly.
•There is no need to use an adapter for computers with DOS/V compatible mini
•A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured depending on some signals. This is not the malfunction.
•If the edges of the picture are stretched, readjust the picture position adjustments in the PC Settings menu.
•Depending on the specification of the PC you are playing the
Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC terminal
Pin No. | Signal name | Pin No. | Signal name |
1 | R | 9 | NC |
2 | G | 10 | Ground |
3 | B | 11 | NC |
4 | NC (not | 12 | NC |
| connected) |
|
|
5 | NC | 13 | |
6 | Ground | 14 | |
7 | Ground | 15 | NC |
8 | Ground |
|
|
29