Getting started
Programming channels into the TV’s channel memory
•First, use the Auto tuning function to preset all the active channels in your area automatically. Then, arrange the preset channels with the Manual tuning function so that you can tune into only desired channels.
•Use the Manual tuning operation if desired channels cannot be preset with the Auto tuning or if you would like to preset channels to specifi c position numbers one by one.
Programming channels automatically
1
2 Press Qto start the automatic search.
The search will begin for all available stations.
Auto tuning
Searching
POS: 02
EXIT Stop
The slide bar will move along the line as the search progresses.
If you make a mistake, simply repeat steps
3 When the automatic search is completed, the TV will automatically return to the fi rst programme position.
4 Press PB or Pb to view the programmed position.
Note:
When you preset the programme channel which sound of broadcast transmission system adopts “M” system, the sound system may not be tuned correctly if the radio waves transmit badly. At that time, preset the channel by Manual tuning.
The countries such as Myanmar, Brazil, Chile, Colombia apply to this case. See page 33 for more details.
Manually setting channels in the channel memory
1 From the SETUP menu, press u or U to select Manual tuning.
2 Press Qto display the Manual tuning menu. Press u or U to select the programme position you want to arrange.
|
|
| Manual tuning | |
Prog. | Label | |||
1 |
|
|
|
|
2 |
|
|
|
|
3 |
|
|
|
|
4 |
|
|
|
|
5 |
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
OK Select | Sort | |||
MENU Back | EXIT Watch TV | |||
3 Press Qto display the breakdown menu. Press I or i to select an item, then press u or U to select the item as shown below.
|
|
|
|
|
|
| Manual tuning |
|
|
| |||||||
|
|
|
|
|
|
|
| Programme |
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
| B/G |
| A |
|
|
|
|
| 0 |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OK | Store |
|
|
|
|
|
|
|
|
|
|
|
| |||
| MENU Back |
|
|
|
| EXIT | Watch TV |
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
| A |
|
|
| C |
|
|
| E |
| G | ||||||
B D F
A. Programme position selection
B. Sound system (- page 33)
C. Colour system (- page 33)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is abnormal, the automatic colour system selection (A) may have malfunctioned, or sound system selection is wrong. In such a case, select another colour and/or sound system (- page 33).
D. Programme position skip selection Press u or U to turn the programme position skip option on “8” or off “(”. The programme position will then be skipped when you select channels with PB or Pb.
The “8” mark will appear beside a programme position number when you use the Number button on the remote control.
14
