English - 5
1
Unplug the cable or antenna from
the back of the TV.
2Connect the cable or antenna to the
ANT IN terminal on the back of the
VCR.
3Connect an Antenna Cable between
the ANT OUT terminal on the VCR
and the ANT IN terminal on the TV.
4
Connect a Video Cable between the
VIDEO OUT jack on the VCR and
the AV IN [Y/VIDEO] jack on the TV.
5Connect Audio Cables between the
AUDIO OUT jacks on the VCR and
the AV IN [R-AUDIO-L] jacks on the
TV.
6Press the SOURCE button on
the remote control until you see
the VCR signal (see “Viewing an
External Signal Source” on page 9).
➢
If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the
TV. If your VCR is stereo, you must connect two cables.
➢
Each VCR has a different back panel configuration.
➢
When connecting a VCR, match the color of the connection terminal to the cable.
➢
When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

Connecting a VCR

VCR Rear Panel
Video Cable (Not supplied)
Audio Cable
(Not supplied)
12
TV Rear Panel
Antenna Cable (Not supplied)
1Connect Audio Cables between the
AUDIO OUT [R-AUDIO-L] jacks on
the TV and AUDIO IN [L-AUDIO-R]
jacks on the Amplifier/DVD Home
Theater.
When an audio amplifier is
connected to the AUDIO OUT
[R-AUDIO-L] jacks terminals :
Decrease the volume of the TV,
and adjust the volume level with the
Amplifier’s volume control.
➢
Each Amplifier / DVD Home
Theater has a different back panel
configuration.
➢
When connecting an Amplifier / DVD
Home Theater, match the color of the
connection terminal to the cable.

Connecting an Amplifier / DVD Home Theater

Amplifier / DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)
1
BN68-01363L-00Eng.indd 5 2008-04-04 오후 2:06:06