27
English
04 Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu Description
View TV Changes Anynet+ mode to TV broadcast mode.
Device List Shows the Anynet+ device list.
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
¦Setting Up Anynet+
O
MENU
m
→ Application → Anynet+ (HDMI-CEC) → ENTER
E
■Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎
When the Anynet+ (HDMI- CEC) function is disabled, al l the Anynet+ related operations are dea ctivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
✎
If Auto Turn Off is set to Yes, running external d evices will turn off at the sam e time as the TV powers off.
However, a device may not turn off if record ing is in progress.
✎
May not be enabled dependi ng on the device.
¦Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
✎
If you cannot find a device you wan t, press the Red button to refresh the lis t.
2. Select a device and press the ENTER
E
button. You can switch to the selected device.
✎
The Device List to On menu wil l only appear when you set Anyn et+ (HDMI-CEC) to On in the Appli cation menu.
x
Switching to the selected devi ce may take up to 2 minutes. You cannot cancel the op eration during the switching
operation.
x
If you have selected external in put mode by pressing the SOURCE b utton, you cannot use the Anynet+ funct ion.
Make sure to switch to an Anynet+ device by usin g the Device List.
¦Recording
You can make a recording of a TV Program using a Samsung recorder.
1. Select Recording.
✎
When there are more than two re cording devices
x
When multiple recording d evices are connected, the reco rding devices are listed. Sele ct one recording device in
the Device List.
✎
When the recording device i s not displayed, select Device L ist and press the Red button to sea rch devices.
2. Press the EXIT button to exit.
✎
You can record the source streams by sele cting Recording: (device_ name).
✎
Pressing the
�
(REC) button will record whateve r you are currently watching. If you are watchin g video from
another device, the video fro m the device is recorded.
✎
Before recording, check whe ther the antenna jack is properl y connected to the recording devi ce. To properly
connect an antenna to a recordi ng device, refer to the recording devi ce’s users manual.
[PC430_USA]BN68-02576A-04Eng.indb 27 2010-06-24 오후 7:36:15