English - 31
.
e
e
d
n
e
Setting the Screen Burn Protection Timer
You can set the timer for Screen Burn Protection (hours, minutes).
If you start the operation to erase any residual image, the operation
will be performed for the set period of time and then automatically
finish.
1Press the MENU ()button.
Result:The main menu is displayed.
2Press the …or †button to select Function.
Result:The Function menu is displayed.
3Press the ENTER () button.
4Press the …or †button to select Screen Burn Protection.
Press the ENTER () button.
5Press the …or †button to select Timer.
Press the ENTER () button.
Result:The Timer menu is displayed.
6Press the ENTER () button again.
7Select On by pressing the …or †button.
Press the ENTER () button.
8Select the required option by pressing the …or †button.
Result:The following options are available.
◆Mode :All White, Signal Pattern, Inverse,
Bar,Bar & Inverse
◆Period :Hour(1~24)
◆Time :Minute(1~30)
9Press the EXIT button to exit.
Pixel Shift
All White
Signal Pattern
Inverse
Bar
Bar & Inverse
Timer
Screen Burn Protection
Move Enter Return
Timer : Off
Mode : Signal Pattern
Period : 1 Hour
Time : 30 min.
Timer
Move Enter Return
Off
On
Timer : On
Mode :Signal Pattern
Period : 01 Hr.
Time : 05 min
Timer
Move Enter Return
All White
Signal Pattern
Inverse
Bar
Bar & Inverse
Timer : On
Mode :All White
Period : 01
Time : 30 min.
Timer
Move Enter Return
01
▲
▲
Timer : On
Mode :All White
Period : 1 Hour
Time : 30
Timer
Move Enter Return
30
▲
▲
BN68-01304G_Eng 10/9/07 5:05 PM Page 31