![Wake-up Timers can of course also be deleted again.](/images/new-backgrounds/23238/2323823x1.webp)
12
You can make BeoSound 1 wake you up in the morning.
The
While the Timer is executed, the time is shown in the display, when you operate or switch off your BeoSound 1, the display returns to the mode you have chosen.
Once you have made one
Wake-up Timers can of course also be deleted again.
Wake-up Timer
Enter a Wake-up Timer
When you choose radio as your source, the radio will start playing on the station you last listened to. If you choose CD as your source, make sure that a CD is loaded. If you do not choose a source, the radio will be used for your
While BeoSound 1 is in standby, press and hold or
until the
6.25time for the latest
Press or
to find the time
7.10you want the BeoSound 1 to start playing. Holding down or
will accelerate the change in numbers
RADIO | Press the button of the source |
Pr | you want to use for your Wake- |
| up Timer; RADIO or CD. Pr or |
| Cd is shown in the display |
STORE | Press STORE to store the time |
7.10you want. The time for the
Using Beo4
You can also use the Beo4 remote control to enter a
MENU While BeoSound 1 is in standby,
6.25press the MENU button on Beo4. The time for the latest
1 – 9 Key in the time you want
7.10BeoSound 1 to start playing
RADIO Press the button of the source
Pr you want to use for your
GO | Press GO to store your |
7.10
NOTE! If the clock has not been set, or BeoSound 1 has been disconnected from the mains for approx. 30 minutes, it is not possible to set a