20
It is your own choice whether or not to activate the PIN code system. However, if you choose to activate the system, your BeoSound 1 is protected against theft with a fourdigit PIN code.
The use of a PIN code means that if your BeoSound 1 is disconnected from the mains for more than 30 minutes, the system can only be activated again by keying in your own personal PIN code.
If the PIN code is not entered, the BeoSound 1 automatically switches to standby after 3 minutes.
If a wrong PIN code is entered, you get five attempts to key in the code, after which the system is switched off and cannot be switched on for 3 hours.
Should you forget your PIN code, please contact a retailer who can assist you in receiving a Master code from Bang & Olufsen. You need the Master code to reactivate your BeoSound 1.
Use the PIN code system
Enter the PIN code
If the PIN code system is activated and your BeoSound 1 is disconnected from the mains, you are requested to key in the
Pin | The cue Pin is displayed shortly. |
ooooThe display changes to four squares
Press or to reveal digits
3 _ _ _ The squares change to underscores and the first digit is shown in the display
STORE Press STORE to store the displayed digit and proceed to the next
o _ _ _ The digit is replaced by a square and the next underscore will blink
STORE Press STORE when the last digit is displayed
Pr 8 BeoSound 1 switches on to the last used source. If radio was used last, the program number is shown in the display
Activate the PIN code system
The PIN code system is easily activated, and you choose the
| Press twice when the set is in |
| standby |
STOP | Press STOP to key in a |
| PIN code of your own choice |
Pin | Pin appears briefly, and then |
__ _ _ four underscores appear
| Press or repeatedly to reveal |
3 _ _ _ | digits |
The digits are shown in the | |
| display |
STORE | Press STORE to accept the |
| displayed digit and proceed to |
| the next |
o _ _ _ | The digit is replaced by a square |
| and the next underscore will |
| blink |
STORE Press STORE when the last digit is displayed
__ _ _ The display returns to four underscores and you must confirm the PIN code by entering it again
NOTE: If a wrong code is entered the second time, the cue Err appears in the display, and you must enter and confirm the code again.
NOTE: If you accidentally store a wrong digit, pressing STOP will delete all digits again, and you can enter new ones.