8
To listen to the radio, just press one of the radio buttons, the radio will start playing on the radio station you last
Daily operation of radio and CD player
Switch on the radio | Switch on the CD player |
listened to.
You extend the
If no CD is loaded when you press one of the CD buttons, the CD compartment raises, ready for you to load a CD. When the CD has stopped playing and no commands have been received for 30 minutes, BeoSound 1 switches to standby.
You can adjust and store the volume level at any time.
The display will keep you informed of what you have chosen and you can set the display light to the level suitable for you. Also, choose the display mode you prefer for radio stations; program number or frequency.
When you press RADIO before any radio stations have been stored, the radio will find the first available station.
RADIO | Press RADIO to switch on the |
| radio |
Pr 12 | The program number or |
| frequency is shown in the |
| display |
RADIO | Press to step down and to |
| step up through the stored |
| stations. Keep the button |
| pressed down to ‘search’ |
| through stored stations |
STAND BY | Press to switch BeoSound 1 to |
| standby |
AERIAL | Press AERIAL to extend or retract |
| the |
Note: When the program number is shown, press 
or 
to check the frequency for the current radio
program number.
When you search through a CD, searching will continue as long as you keep the button pressed down. The CD resumes playing, when the button is released.
CD | Press CD to switch on the CD | |
| player |
|
CD 1 | The track number is shown in | |
| the display | |
CD | Press | to step to the previous |
| track. Press to step to the next | |
| track |
|
| Press | to search backwards |
| through the CD | |
| Press | to search forwards |
| through the CD | |
STOP | Press STOP to pause the CD | |
STOP | Press STOP again to resume | |
| playback | |
LOAD | Press LOAD to open or close the | |
| CD compartment | |
