Samsung PRO4782, PRO4775, PRO4768, EV-NX300ZBFUDK Using a smart phone as a remote shutter release

Wireless network

Using a smart phone as a remote shutter release

The camera connects to a smart phone that supports the Remote Viewfinder feature via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewfinder feature. The captured photo will display on the smart phone.

•The Remote Viewfinder feature is supported by Galaxy series smart phones or

Galaxy Tab models with the Android 2.3 OS or higher or iOS devices with the iOS 6.0 or higher. Before using this feature, check the device’s firmware and update it if needed.

•You should install Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, the Google Play Store, or the Apple App Store. Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.

•To install and launch Samsung SMART CAMERA App on an NFC-enabled smart phone, turn on the NFC feature and place the smart phone near an NFC tag (p. 30) on the camera. This feature is supported by smart phones running Android OS 2.3 or higher. This feature is not available for iOS devices.

•This function is not available in 3D mode.

1On the camera, rotate the mode dial to B.

2On the camera, select .

•If the pop-up message that prompts you to download the application appears, select Next.

3On the smart phone, turn on Samsung SMART CAMERA App.

•For iOS devices, turn on the Wi-Fi feature before turning on the application.

•To start the application automatically on an NFC-enabled smart phone, turn on the function and place the smart phone near the NFC tag (p. 30) on the camera. Verify that the smart phone is connected to your camera, and then skip to step 6.

4Select the camera from the list and connect the smart phone to the camera.

•The smart phone can connect to only one camera at a time.

131